| |
Lathe Chucks |
| |
 |
Self Centering Lathe Chucks (Standard Jaws)
Self centering Lathe Chucks are geared scroll chucks for use on lathes, rotory tables, dividing heads, milling machines etc.These chucks are supplied with standard accessories. |
 |
Self Centering Lathe Chucks (Master Top Jaws)
Self centering Lathe Chucks are geared scroll chucks. The jaws are split into two parts, Master Jaw (Base Jaw) and Top Jaws. The top jaws are mounted on base jaws with Allen Bolts. Top Jaws can be replaced with soft jaws also. |
 |
Self Centering Lathe Chucks, Double Jaw Guide (Standard Jaws)
Double jaw guide self centering lathe chucks (Standard Jaw) are geared scroll chucks. There are two slots in body and jaws to provide more gripp and strength. |
 |
Self Centering Lathe Chucks, Double Jaw Guide (Master Top Jaws)
Double jaw guide self centering lathe chucks (Master Top Jaw) are geared scroll chucks.There are two slots in body and base jaws to provide more gripp and strength. The jaws are split into two parts, Master Jaw (Base Jaw) and Top Jaws. The top jaws are mounted on base jaws with Allen Bolts. Top Jaws can be replaced with soft jaws also. |
 |
Four Jaw Independent chuck
The four jaw Independent Chuck, only jaws are adjustable individually by screw. These chucks are used for irregular shapes or where there are particular high accuracy required. |
Body : High tensile Cast Iron alloyed with chromium, nickle and manganese for better resistance. Hardness upto 210 BHN.
: SG Iron Body in 500/7 grade for higher RPM and longer life. Hardness upto 210 BHN.
: Steel Body Nickle Chrome alloy steel of 600 mpa tensile strength with Jaw ways and Knob hardened and ground for better accuracy, life and RPM. Hardness upto 45 HRc.
Scroll : Scroll is made from high tensile alloy steel and drop forged, it is hardened and precision machined for higher accuracy. Hardness upto 40 to 45 HRc.
Jaws : Jaws are made form low carbon alloy steel and case hardened and ground for accuracy and smooth fitting. Jaws teeth are ground from both the sides for higher accuracy and pitch. Hardness upto 62 HRc.
Pinions : Pinions are made from special alloy steel and case hardened upto 50 HRc.
Key : The chucks operating key of suitable strength is provided with every chuck.
Mounting bolts : A set of three / four / six mounting bolts are provided with every chuck.
Salient Features:
Maximum runout 0.05mm.
Tool room accuracy in production.
Costly fixtures eliminated.
Inexpensive to install.
All parts interchangeable.
Long life and rigid grip due to jaw teeth are ground and scroll threads are precision machined.
|
